MDS 9810
902-928 MHz Frequency
Hopping
Spread Spectrum Transceiver
Price:
$790.00
MDS...Global wireless solutions. Industrial Wireless Performance.
For almost two decades Microwave Data Systems (MDS) has been providing wireless networking solutions with applications in SCADA, telemetry, telecommunications, and online transaction markets. MDS provides licensed and unlicensed solutions, approaching 1,000,000 radios installed in 110 countries.
MDS 9810 Product Overview
The MDS 9810 offers a narrow
band, frequency hopping, spread spectrum radio giving increased
throughput, long range alternatives to our customers’ point to
multi-point needs. Transparent and direct asynchronous communication
offer real-time communication. No extra software or programming is
needed to implement communications from standard asynchronous protocols.
The MDS 9810 can be used with a licensed MDS radio system or
independently. It is field configurable as a master or remote radio.
When operating as the master station it controls all network parameters
of the remotes; when operating as a remote radio in the network, peer to
peer communication is enabled as well. This product is available for use
in Class 1, Division 2, Groups A, B, C & D hazerdous locations.*
Why Consider a MDS 9810 Solution?
High system
performance and data integrity! Through
robust construction, digital signal processing technology (DSP) with
self-equalization and forward error correction we offer up to 19.2 kbps
data throughput.
Flexibility and rapid installation! Quick return on
investment due to simple installation, license free radio design as well
as ability to communicate with any asynchronous protocol without extra
software or extra programming. A single MDS 9810 can be configured as a
repeater.
Full Duplex! The MDS 9810 includes a TDD operating mode
that provides Full Duplex operation at a throughput of 9600 bps.
Performance under the most adverse conditions!
Exceptional design provides excellent performance in the face of
interference or difficult signal paths.
Robust Mode allows users to customize the error vs.
throughput performance of the MDS 9810 allowing even better weak signal
performance under adverse conditions.
Network Wide Diagnostics! InSite Network Management
software simplifies tasks and reduces the cost of managing the network
infrastructure. Provides a non-intrusive means of maintenance and link
monitoring.
The MDS 9810 is the price/performance leader; offering the flexibility
and reliability for our customers’ Multiple Address Systems needs.
More Information
Click here to download the
latest Adobe Acrobat Reader.
Features
-
Up to 19.2 kbps Data Throughput
Transparent Operation with Async Protocols
Full Duplex Operation at 9600 bps
End-to-End Delays of only 7 milliseconds
Maximum Allowable Transmit Power - 1 Watt
Forward Error Correction
Software Enhanced Mode for Increased Data Integrity
High Performance Receiver
Sleep Mode for Solar Powered Sites
Programmable Selection of Preferred Channels
Deterministic Data Response for Real-time SCADA Control
Field Configurable as Master or Remote Radio
Master Radio Controls All Network Parameters of Remote Radios
Peer-to-Peer Communications
Single Radio can be used as a Repeater
Specifications
|
|
|
General | Data Characteristics | Transmitter | Receiver | Power | Environmental | Diagnostics | Agency Approvals | Configuration Diagrams |
|
|
|
|
Frequency Bands: |
902-928 MHz Part 15 Spread Spectrum Band |
|
|
|
|
Frequency Hopping Range: |
8 selectable
zones each containing 128 |
|
|
|
|
Operation: |
Half Duplex
(+/– 1.6 MHz Tx/Rx split) Simplex |
|
|
|
|
Frequency Stability: |
0.00015%
(1.5 PPM) |
|
|
|
|
System Addresses: |
1-65,000 |
|
|
|
|
Signaling Standard: |
RS-232 |
|
|
|
|
Connector: |
DB-25 Female |
|
|
|
|
Data Port Rates: |
1200, 2400, 4800, 9600, 19200, bps asynchronous (can accept 38400 bps) |
|
|
|
|
Data Rate (rf): |
22.5 kbps |
|
|
|
|
Average and Typical Latency: |
< 7 ms typical (buffer off mode) |
|
|
|
|
Byte Length: |
10 or 11
bits including start and stop and (opt.) parity |
|
|
|
|
Transparent Communications: |
For all asynchronous protocols |
|
|
|
|
Power Output: |
.1 to 1 Watt (20-30 dBm 1dB) |
|
|
|
|
Duty Cycle: |
Continuous |
|
|
|
|
Output Impedance: |
50 ohms |
|
|
|
|
Spurious Emissions: |
-60 dBc |
|
|
|
|
Harmonic Emissions: |
-80 dBc |
|
|
|
|
Transmitter Keying: |
Data activated |
|
|
|
|
Maximum SWR (No Damage): |
Infinite, all phase angles |
|
|
|
|
Type: |
Double conversion superheterodyne |
|
|
|
|
Bit Error Rate: |
Less than 10–6 at –110 dBm |
|
|
|
|
Intermodulation: |
75 dB minimum (EIA) |
|
|
|
|
Desensitization: |
65 dB |
|
|
|
|
Spurious: |
70 dB minimum |
|
|
|
|
Power Connector: |
6 foot (1.8 m) pigtail included |
|
|
|
|
Voltage: |
13.8 Vdc
nominal |
|
|
|
|
TX Supply Current: |
< 500 mA @ 13.8 Vdc |
|
|
|
|
RX Supply Current: |
< 125mA @ 13.8 Vdc |
|
|
|
|
Sleep Mode: |
< 30 mA @ 13.8 Vdc |
|
|
|
|
Fuse: |
1.5 Amp polyfuse |
|
|
|
|
Reverse Polarity Protection: |
Diode across primary power input |
|
|
|
|
Humidity: |
95% at 40°C (104°F); non-condensing |
|
|
|
|
Temperature Range: |
Full
performance: –30° to + 60°C (–22° to 140°F) |
|
|
|
|
Size: |
2.0" x 5.625" x 7.25" (5.0 x 14.3 x 18.41 cm) |
|
|
|
|
Weight: |
2.2 pounds (1 kg) |
|
|
|
|
Case: |
Die-cast aluminum |
|
|
|
|
RSSI: |
Received
Signal Strength averaged over |
|
|
|
|
Main Supply Voltage: |
13.8 input voltage |
|
|
|
|
Radio alarm & status: |
External LEDs (PWR, SYNC, TXD, RXD) |
|
|
|
|
Temperature: |
Internal Temperature |
|
|
|
|
Signal Quality: |
Signal to Noise Ratio |
|
|
|
|
Radio Status: |
Go/No-Go Indicator |
|
|
|
|
8 Zone Quality Level: |
Availability of data in each Frequency Zone |
|
|
|
|
FCC: |
Part 15.247 FCC approved |
|
|
|
|
Industry Canada: |
RSS 210 approved |
|
|
|
|
UL: |
Approved for UL 508, UL 1604 |
|
|
|
|
UL Hazardous Location: |
Approved for Class I, Div. 2; Groups A, B, C and D; hazardous locations |
|
|
|
|
FM: |
Approved for Class I, Div. 2; Groups A, B, C and D; hazardous locations |
|
|
|
|
|
|
|
|
|
* The transceiver is not acceptable as a stand-alone unit for use in the hazardous locations described above. It must either be mounted within another piece of equipment, which is certified for hazerdous locations, or installed within guidelines, or conditions of approval, as set forth by approving agencies.
MDS products are manufactured under a quality system certified to ISO 9001. MDS reserves the right to make changes to specifications of products described in this data sheet at any time without notice and without obligation to notify any person of such changes.
Copyright 2001 MDS Inc. (Part No. 9810) SL0010 Rev. N, 06-21-02
